To Next PageTo Next Page
Need help?Do you have a question about the GiBiDi BE24 and is the answer not in the manual?
General| Brand | GiBiDi |
|---|---|
| Model | BE24 |
| Category | Control Unit |
| Language | English |
Configures START command response: opens, uninfluential, or reloads closing time.
Configures START command response for step-by-step operation with stops.
Sets operation for Terminal 21 (8K2 EDGE) for gate movement inversion.
Sets operation for Terminal 21 (8K2 STOP) for gate stopping.
Adjusts the sensitivity level for the anti-crushing function.
Configures automatic closing and pause time settings.
Enables pre-flashing of 3 seconds before motor activation.
Sets delay times for motors during opening and closing.
Enables water hammer function for electric lock release.
Adjusts deceleration speed to 50% or 30% of maximum speed.
Sets normal movement speed to 100% or 80% of maximum speed.
Enables fast closing function, reduces stand-by time.
Selects between ENCODER and TIME mode for operation.
Activates or disables the anti-crushing function.
Configures terminals M2_7 and M2_8 for warning or flashing light.
Assigns START command to transmitter buttons.
Assigns PEDESTRIAN command to transmitter buttons.
