PASS
15
UK
Check periodically the operation of the safety devices: do not use yourself or other people to do it, but only some
objects.
Check periodically that the structure of the gate, hinges and guides do not have signs of failure or instability.
Cut the power from the installation and check the correct operation of the unlocking device.
WARNINGS FOR THE USER
USER'S OPERATIONAL MAINTENANCE
Date Notes Sign
In the event of an operating fault or failure, cut the power to the system and call the technical service.
Do not allow people or objects to stay in the range of action of the automation.
Keep children far from the control devices.
Do not obstruct the automation’s movement willingly.
To move the gate by hand it is necessary to unlock the operator and cut the power to the installation.
Before restoring the automatic movement, it is necessary to re engage the gate.
Any repairs must be carried out by specialised personnel using original and certified materials.
The product is not to be used by children or people with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given supervision or instruction.
Do not touch the control board for adjustments and / or maintenance.
The end user is responsible for the periodical checking of safety devices efficiency and must make the operational
maintenance every six months.
The user must respect the special maintenance plan received by the installer.
To Next Page
Loading...
Need help?
General
