Need help?Do you have a question about the GiBiDi TAIMEN T6 and is the answer not in the manual?
General| Brand | GiBiDi |
|---|---|
| Model | TAIMEN T6 |
| Category | Gate Opener |
| Language | English |
Overview of the TAIMEN T6-T12 gearmotors and their capabilities.
Essential safety precautions and responsibilities for installers before and during installation.
Important safety instructions and usage guidelines for the end-user of the automated system.
Detailed technical data including voltage, power, force, speed, and environmental ratings.
Pre-installation checks for door structure conformity and preliminary warnings.
Covers initial installation steps for drive rails and brackets.
Describes installing the control unit/courtesy light in three different ways.
Details on composing and assembling the drive rail segments and components.
Instructions for determining position and fixing the wall bracket.
Steps for attaching the operator to the wall bracket.
Continues installation with operator mounting, connections, and adjustments.
Steps for assembling and connecting the towing arms.
Procedure for manually engaging and disengaging the operator.
Connecting power and adjusting limit switches for operation.
Instructions for mounting the operator unit to the ceiling structure.
Explains the control unit display signals and onboard button operations.
Explanation of various error and status codes shown on the display.
Description of the functions assigned to the buttons on the control board.
Guides on managing transmitters and configuring travel learning.
Instructions for learning, storing, and cancelling transmitters.
Procedure for setting travel limits and anti-crushing parameters.
Detailed guide on how to access and modify various operating parameters.
Specifics on configuring photocell inputs and RS terminal functions.
Configuration options for photocells connected to terminal SB.
Defines the functions of the RS terminal, e.g., safety edge.
Details on various input configurations for advanced control logic.
Further details on RS terminal functions like step-by-step or stop.
Configuration options for the NO input for various operating logics.
Mapping of functions to specific buttons on the transmitter.
Configuration settings for automatic closing and lighting features.
Settings for the courtesy light power-on time.
Configuration of automatic closing times for the door.
Settings for fast closing function after photocell interruption.
Adjustments for door movement speed, timing, and indicator lights.
Adjusting the opening and closing speed of the door.
Setting the duration of the slow-down phase before reaching limits.
Options for configuring the flashing light output.
Enabling or disabling pre-flashing before motor start.
Configuration of advanced features like detensioning and anti-crushing.
Configuration for detensioning the system after closing.
Setting the amperometric threshold for the anti-crushing system.
Settings for managing time recovery in slow-down phases.
Covers special functions, reset, forced movement, and optional accessories.
Procedures for resetting defaults and manually operating the door.
Specific setup for wicket doors and overhead door automation.
Information on using a battery kit for backup power.
Interprets indicator signals and notes regulatory compliance requirements.
Table explaining the meaning of light signals and their effects.
Notes on installer responsibility and regulatory compliance.
Manufacturer's declaration of product conformity to CEE directives and standards.
To Next Page
