Need help?Do you have a question about the Giersch G55 and is the answer not in the manual?
Diagram illustrating the flow path of air and oil within the burner system.
Guidance on connecting the burner to the power supply and overcurrent protection.
Procedure for connecting the compressed air line to the pressure regulator.
Diagrams showing preset dimensions for ignition electrodes for G20, G55/70/100, and G150/200 models.
Checks to perform after commissioning and servicing, including restart and safety functions.
Explanation of safety mechanisms, fault detection, and switching sequences during operation.
Procedure for measuring photocurrent using a digital measuring instrument.
Setting values for start-up, including oil throughput, primary air, and secondary air for various burner types.
Recommended maintenance intervals for oil quality, including monthly and annual tasks.
Table of common burner issues, their causes, and recommended remedies for startup and operation.
To Next Page
General
