To Next Page

To Previous Page

& Memory Multiplier Tweaker

Provides different levels of memory auto-tuning. (Default: Auto)

& Channel Interleaving

Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access

different channels of the memory to increase memory performance and stability. Auto lets the BIOS

automaticallycongurethissetting.(Default:Auto)

& Rank Interleaving

Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different

ranks of the memory to increase memory performance and stability. Auto lets the BIOS automatically

congurethissetting.(Default:Auto)

` Channel A/B Memory Sub Timings

This sub-menu provides memory timing settings for each channel of memory. The respective timing setting

screensarecongurableonlywhenMemory Timing Mode is set to Manual or Advanced Manual. Note:

Your system may become unstable or fail to boot after you make changes on the memory timings. If this

occurs, please reset the board to default values by loading optimized defaults or clearing the CMOS values.

` Advanced Voltage Settings

` Advanced Power Settings

& CPU Vcore Loadline Calibration

 AllowsyoutocongureLoad-LineCalibrationfortheCPUVcorevoltage.Selectingahigherlevelkeeps

the CPU Vcore voltage more consistent with what is set in BIOS under heavy load. Auto lets the BIOS

automaticallycongurethissettingandsetsthevoltagefollowingIntel'sspecications.(Default:Auto)

` CPU Core Voltage Control

This section provides CPU voltage control options.

` DRAM Voltage Control

This section provides memory voltage control options.

` Internal VR Control

This section provides VR voltage control options.

` PC Health Status

& Reset Case Open Status

Disabled Keeps or clears the record of previous chassis intrusion status. (Default)

Enabled Clears the record of previous chassis intrusion status and the Case Openeldwill

show "No" at next boot.

& Case Open

Displays the detection status of the chassis intrusion detection device attached to the motherboard CI

header.Ifthesystemchassiscoverisremoved,thiseldwillshow"Yes",otherwiseitwillshow"No".To

clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to

the CMOS, and then restart your system.

& CPU Vcore/CPU VCCSA/DRAM Channel A/B Voltage/+3.3V/+5V/+12V/CPU VAXG

Displays the current system voltages.

- 24 -

GIGA-BYTE TECHNOLOGY H310M H User Manual

Questions and Answers: