GIGA-BYTE TECHNOLOGY M27Q P User Manual

- 21 -
To switch to USB Type-C input source, simply press the KVM button or
the Control button.
However, when there is no input signal from currently selected input
source, the system will return to the previous connected input source.
Note: This option will be disabled if the KVM button function is disabled
(KVM OFF).
• KVM Wizard: Configure the KVM related settings.
Set the input source to be bound with USB Type-B connection first,
and then following with USB Type-C connection.
Note: If you set the USB-B Display setting to Type-C, the TYPE-C
Display menu option will automatically be disabled. You will then see
the KVM status in the KVM Wizard page as below.

GIGA-BYTE TECHNOLOGY M27Q P Specifications

General

Brand	GIGA-BYTE TECHNOLOGY
Model	M27Q P
Category	Monitor
Language	English