GIGA-BYTE TECHNOLOGY M27Q X User Manual

- 22 -
Gaming Monitor User Guide
• KVM ON/OFF: Enable/Disable the KVM button function.
√ Select ON to enable the KVM button function. Once the system
detected USB Type-C input signal, a message box will appear on
the screen.
KVM
Press to switch device.
Press the KVM button or the Control button to switch to USB
Type-C input source.
Note: When the KVM button function is enabled, the KVM ON will be
displayed on the left panel.
√ Select OFF to disable the KVM button function.
Note: When the KVM button function is disabled, the KVM OFF will be
displayed on the left panel.
• KVM Reset: Restore the KVM default settings.
√ HDMI 1 input source is bound with USB Type-B connection.
√ USB Type-C input source is bound with USB Type-C connection.
√ The KVM ON/OFF function is set to ON.

GIGA-BYTE TECHNOLOGY M27Q X Specifications

General

Brand	GIGA-BYTE TECHNOLOGY
Model	M27Q X
Category	Monitor
Language	English