Gigabyte B450M S2H - Peripherals Configuration

2-6 Peripherals
& AMD CPU fTPM
 EnablesordisablestheTPM2.0functionintegratedintheAMDCPU.(Default:Disabled)
& Initial Display Output
 SpeciestherstinitiationofthemonitordisplayfromtheinstalledPCIExpressgraphicscardortheonboard
graphics.
IGDVideo
(Note)
 Setstheonboardgraphicsastherstdisplay.
PCIe1Slot SetsthegraphicscardonthePCIEX16slotastherstdisplay.(Default)
& Legacy USB Support
 AllowsUSBkeyboard/mousetobeusedinMS-DOS.(Default:Enabled)
& XHCI Hand-off
 Determineswhether to enableXHCI Hand-offfeature foran operating systemwithout XHCI Hand-off
support.(Default:Enabled)
& EHCI Hand-off
 Determineswhether to enableEHCI Hand-offfeature foran operating systemwithout EHCI Hand-off
support.(Default:Disabled)
& Port 60/64 Emulation
Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support
forUSBkeyboards/miceinMS-DOSorinoperatingsystemthatdoesnotnativelysupportUSBdevices.
(Default:Disabled)
& USB Mass Storage Driver Support
 EnablesordisablessupportforUSBstoragedevices.(Default:Enabled)
& Mass Storage Devices
 DisplaysalistofconnectedUSBmassstoragedevices.ThisitemappearsonlywhenaUSBstoragedevice
is installed.
(Note) ThisitemispresentonlywhenyouinstallaCPUthatsupportsthisfeature.
- 30 -