Gigabyte B450M S2H - Page 33

& SATA Mode
 EnablesordisablesRAIDfortheintegratedSATAcontrollersorcongurestheSATAcontrollerstoAHCI
mode.
RAID   EnablesRAIDfortheSATAcontroller.
AHCI   CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface
(AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced
SerialATAfeaturessuchasNativeCommandQueuingandhotplug.(Default)
& NVMe RAID mode (M2A_SOCKET Connector)
 AllowsyoutodeterminewhethertouseyourM.2NVMePCIeSSDstocongureRAID.(Default:Disabled)
& APU SATA Port Enable (M2A_SOCKET Connector)
 EnablesordisablestheSATAcontrollerintegratedintheCPU.(Default:Enabled)
& Chipset SATA Port Enable (SATA3 0, 1, 2, 3 Connectors)
 EnablesordisablestheintegratedSATAcontrollers.(Default:Enabled)
& APU SATA Port 0 (M2A_SOCKET Connector)
 DisplaystheinformationoftheconnectedM.2SATAdevice(s).
& Chipset SATA Port 0/1/2/3 (SATA3 0, 1, 2, 3 Connectors)
 DisplaystheinformationoftheconnectedSATAdevice(s).
- 33 -