- 16 -
2-6 Installing GC-B650I FRONT CARD
Read the following guidelines before you begin to install GC-B650I FRONT CARD:
• Always turn off the computer and unplug the power cord from the power outlet before the installation
to prevent hardware damage.
• The add-in card has a foolproof design. It can be installed in only one direction. If you are unable
to insert the card, switch the direction.
Follow the steps below to correctly install the GC-B650I FRONT CARD in the FPANEL_CARD connector:
1. Align the gold ngers of the add-in card with the FPANEL_CARD connector on the motherboard.
2. Place your thumbs on the top edge of the add-in card and push the add-in card rmly into its connector.
3. You need to push the card all the way into the FPANEL_CARD connector until it clicks and make sure it
doesn't wobble.
GC-B650I FRONT CARD
FPANEL_CARD
To Next Page
Loading...
