Gigabyte B650I AORUS ULTRA - Page 28

- 28 -
15) RST_SW
(Note 2)
/RST (Reset Button/Reset Jumper)
The reset button (RST_SW) allows users to quickly turn on/off the computer in an open-case environment
when they want to change hardware components or conduct hardware testing. The reset jumper (RST)
can connect to the reset switch on the chassis front panel. Press the reset switch to restart the computer
if the computer freezes and fails to perform a normal restart.
The reset button (RST_SW)/rest jumper (RST) provides you with several functions to use. To remap
the button to perform different tasks, please navigate to the "BIOS Setup" page of GIGABYTE's
website and search for "RST_SW (MULTIKEY)" for more information.
1
Pin No. Denition
1 Reset
2 GND
RST
RST_SW
(Note 2) The connector is on the front of GC-B650I BTB PLUG.
Pin No. Denition
1 PW_BT
2 GND
16) PW_BT (Power Switch Jumper)
The power switch jumper can connect to the power switch on the chassis front panel. You may congure
the way to turn off your system using the power switch (please navigate to the "BIOS Setup" page of
GIGABYTE's website and search for "Soft-Off by PWR-BTTN" for more information).
1