Gigabyte B660M DS3H AX DDR4 - Chapter 1 Product Introduction; 1-1 Motherboard Layout

11. After confirmation click with the mouse pointer on "Press to Start" in the following window (see
Fig. 05) to start the update process.
(Fig. 05: Q-Flash Run Menue)
12. The computer will be restarted several times during the update process, which is indicated by
another status message (see fig. 06). Confirm this message also by pressing "Ok".
13. Important: Please do never interrupt this process to avoid possible loss of data and damage to
hardware and software!
(Fig. 06: „Restart-Information“ Q-Flash Run Menue)