Gigabyte E1425M - Status Indicators

English
11
E1425 SERIES USER’S MANUAL
2.4 Status Indicators
The status indicator lights correspond to specic operating modes.
These modes are: Power on/ Suspend status, Battery/AC Adapter
status, hard drive activity (HDD), Num Lock, Caps Lock, and
wireless transmission activity.
LED status indicators
These status indicatorsare used to show specic information on the
E1425 such as if the Wireless LAN or Bluetooth is On or Off and if
the Battery Pack is charging or not. From Left to Right they are:
NO. Symbol Item Function
1 Power LED
This LED shows whether the Notebook is
power on or in sleep mode. A continuous
blue LED indicates power, while a blinking
blue LED indicates suspend/sleep mode.
If this LED is off then the notebook is not
powered at all.
2
Wireless
Connection
LED
This LED indicates whether the built-
in Wireless LAN Module is active and
connected. If the LED is on, there is
connection and the adaptor is switched
on. No LED means that there is no
connection and the adaptor is switched
off.
3
Battery
Status LED
This LED is used to show if the battery
pack of the notebook is charging or not, or
if there is a battery fault. It will illuminate
if the battery is charging and switch off
when charged, but it will ash on and off if
there is no battery present or the battery
is no longer working
4
Hard Disk
Activity
Status LED
This LED indicates Hard Disk Activity and
will show if the HDD is in use or idle. It will
ash on and off rapidly when the drive is
active and remain off when the hard drive
is not being used.