Gigabyte G1.Sniper B6 - 1-7 Changing the Operational Amplifier

USB 3.0/2.0 Port
TheUSB3.0portsupportstheUSB3.0specicationandiscompatibletotheUSB2.0/1.1specication.
UsethisportforUSBdevicessuchasaUSBkeyboard/mouse,USBprinter,USBashdriveandetc.
Center/SubwooferSpeakerOutJack
Usethisaudiojacktoconnectcenter/subwooferspeakersina5.1/7.1-channelaudioconguration.
RearSpeakerOut
Thisjackcanbeusedtoconnectfrontspeakersina4/5.1/7.1-channelaudioconguration.
OpticalS/PDIFOutConnector
This connector provides digital audio out to an external audio system that supports digital optical audio.
Before using this feature, ensure that your audio system provides an optical digital audio in connector.
Line In
The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.
LineOut
The line out jack. This jack supports audio amplifying function. For better sound quality, it is recommended
that you connect your headphone/speaker to this jack (actual effects may vary by the device being used).
Use this audio jack for a headphone or 2-channel speaker. This jack can be used to connect front speakers
ina4/5.1/7.1-channelaudioconguration.
Mic In
The Mic in jack. Microphones must be connected to this jack.
Theaudiojackscanbereconguredtoperformdifferentfunctionsviatheaudiosoftware(supported
functionsmayvarybasedonhardwarespecication).IfyouinstallaSideSpeaker,youneedto
retask other audio jack to be Side Speaker out. Only microphones still MUST be connected to the
default Mic in jack.
1-7 ChangingtheOperationalAmplier
For purchasing the IC extractor and OP Chip, please contact the local dealer.
Step 1:
Use an IC extractor to carefully grip the IC's sides and extract it from the socket.
Step 2:
Align the notch on your OP chip with the notch on the socket and gently press the chip into the socket until seated.
- 12 -