Need help?Do you have a question about the Gigabyte G1.Assassin and is the answer not in the manual?
General| Non-ECC | Yes |
|---|---|
| Memory voltage | 1.5 V |
| Memory channels | Dual-channel |
| Number of memory slots | 6 |
| Maximum internal memory | 24 GB |
| Supported memory clock speeds | 800, 1066, 1333, 2200 MHz |
| Supported memory module capacities | 4GB |
| System bus rate | 6.4 GT/s |
| Processor socket | Socket B (LGA 1366) |
| Processor manufacturer | Intel |
| Compatible processor series | Intel® Core™ i7 |
| Processor system buses supported | 800, 1066, 1333 MHz |
| USB 2.0 connectors | 3 |
| Number of SATA connectors | 8 |
| Number of SATA III connectors | 2 |
| Number of Parallel ATA connectors | - |
| USB 2.0 ports quantity | 4 |
| Firewire (IEEE 1394) ports | 0 |
| Controller interface type | Marvell 88SE9182 |
| Controller 2nd interface type | JMicron JMB362 |
| Audio chip | Realtek ALC889 |
| Component for | PC |
| Audio output channels | 7.1 channels |
| Motherboard form factor | ATX |
| Compatible operating systems | Microsoft Windows 7, Vista, XP |
| On-board graphics card | No |
| Parallel processing technology support | 3-Way SLI |
| LAN controller | Bigfoot Killer E2100 |
| Ethernet interface type | Gigabit Ethernet |
| BIOS type | AWARD |
| ACPI version | 1.0b |
| BIOS memory size | 32 Mbit |
| RAID levels | 0, 1, 5, 10, JBOD |
Weight and Dimensions| Depth | 263 mm |
|---|---|
| Width | 305 mm |
Safety guidelines and overview of motherboard components and their installation.
Step-by-step instructions for installing CPU, memory modules, and expansion cards.
Explanation of back panel connectors, internal headers, and front panel installation.
Accessing BIOS, startup screens, main menu, and standard CMOS settings.
Options for overclocking, memory tuning, power management, and system health monitoring.
Guide for installing essential system drivers and provided software.
Using Xpress Recovery2, updating BIOS, and tuning system with EasyTune 6.
Exploring power saving, RAID configuration, and remote overclocking functionalities.
Steps for SATA setup, RAID array creation, and rebuilding procedures.
Installing essential drivers and common troubleshooting steps for system issues.
To Next Page