Gigabyte G1.Assassin - Configuring Audio Input and Output; Configuring 2;4;5.1;7.1-Channel Audio

- 111 - Appendix
5-3-1 Conguring 2/4/5.1/7.1-Channel Audio
The motherboard supports 2/4/5.1/7.1-channel audio.
Refer to the following for multi-channel speaker con-
gurations.
• 2-channel audio: Headphone or Line out.
• 4-channel audio: Front speaker out and Rear
peaker out.
• 5.1-channel audio: Front speaker out, Rear speak-
er out, and Center/Subwoofer speaker out.
• 7.1-channel audio: Front speaker out, Rear speaker out, Center/Subwoofer speaker out, and Side speaker out.
5-3 Conguring Audio Input and Output
A. Conguring Speakers
(The following instructions use Windows 7 as the example operating system.)
Center/Subwoofer
Speaker Out
Line In/Mic In
Rear Speaker Out
Front Speaker
Out
Side
Speaker Out
Step 1:
Connect your speakers to the corresponding jacks on
your computer. While in the operating system, right-
click on the
iconinthenoticationareaandselect
Playback devices.
Step 2:
On the Playback tab, ensure Speakers is set to the
default playback device. Then right-click on Speakers
and select Congure Speakers.
Step 3:
From the Audio Channels list, select Stereo, Quad-
raphonic, 5.1 Surround, or 7.1 Surround according
tothetypeofspeakercongurationyouwishtosetup.
Then follow the on-screen instructions to complete.