Gigabyte G1.Sniper H6 - Page 59

- 59 -
Conguring SATA Hard Drive(s)
C-1.UEFIRAIDConguration
OnlyWindows8.1/864-bitsupportsUEFIRAIDconguration.
Step 1:
In BIOS Setup, go to BIOS Features and set Windows 8 Features to Windows 8 and CSM Support to Never
(Figure2).SavethechangesandexitBIOSSetup.
Step 2:
After the system reboot, enter BIOS Setup again. Then enter the Peripherals\Intel(R)RapidStorageTechnology
sub-menu(Figure3).
Figure 2
Figure 3