Gigabyte G1.Sniper H6 - Advanced Frequency Settings

- 37 -
BIOS Setup
` M.I.T. Current Status
This screen provides information on CPU/memory frequencies/parameters.
` Advanced Frequency Settings
& Performance Upgrade
(Note)
j
 Providesyouwithvedifferentoverclockingcongurations.Optionsare:20%Upgrade,40%Upgrade,
60%Upgrade,80%Upgrade,100%Upgrade.(Default:Auto)
& CPU Base Clock j
 AllowsyoutomanuallysettheCPUbaseclockin0.01MHzincrements.(Default:Auto)
Important: It is highly recommended that the CPU frequency be set in accordance with the CPU
specications.
& Host/PCIe Clock Frequency
(Note)
j
 Allowsyoutomanuallysetthehostclockfrequency(whichcontrolsCPU,PCIe,andmemoryfrequencies)
in0.01MHzincrements.
 ThisitemiscongurableonlywhenCPU Base Clock is set to Manual.
& ProcessorBaseClock(GearRatio)
(Note)
j
 AllowsyoutoconguretheProcessorBaseClockbymultiplyingtheHost/PCIe Clock Frequency by several
presethostclockmultipliers.ThisitemiscongurableonlywhenCPU Base Clock is set to Manual.
& Spread Spectrum Control
(Note)
j
 EnablesordisablesCPU/PCIeSpreadSpectrum.(Default:Auto)
 ThisitemiscongurableonlywhenCPU Base Clock is set to Manual.
& Host Clock Value j
This value is determined by multiplying the Host/PCIe Clock Frequency value by the Processor Base
Clock(GearRatio) value.
(Note) ThisitemispresentonlywhenyouinstallaCPUthatsupportsthisfeature.Formoreinformationabout
Intel
®
CPUs' unique features, please visit Intel's website.
j Only for G1.Sniper Z6.