Gigabyte G1.Sniper - Page 52

BIOS Setup - 52 -
USB Keyboard Function
Allows USB keyboard to be used in MS-DOS. (Default: Enabled)
USB Mouse Function
Allows USB mouse to be used in MS-DOS. (Default: Disabled)
USB Storage Function
 Determineswhether to detect USBstorage devices, including USBashdrives and USB harddrives
during the POST. (Default: Enabled)
Onboard Audio
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
Onboard H/W LAN
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
Onboard USB 3.0 Controller (Renesas D720200 USB Controller)
Enables or disables the Renesas D720200 USB controller. (Default: Enabled)
eSATA Controller ( JMicron JMB362 Chip, eSATA Connectors)
 EnablesordisablestheSATAcontrollerintegratedintheJMicronJMB362chip.(Default:Enabled)
eSATA Ctrl Mode ( JMicron JMB362 Chip, eSATA Connectors)
 EnablesordisablesRAIDfortheSATAcontrollerintegratedintheJMicronJMB362chiporcongures
the SATA controller to AHCI mode.
IDE   DisablesRAIDfortheSATAcontrollersandcongurestheSATAcontrollerstoIDE
mode. (Default)
RAID Enables RAID for the SATA controllers.
AHCI   CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface
     (AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced
Serial ATA features such as Native Command Queuing and hot plug.
GSATA3 6_7/IDE Controller ( Marvell 88SE9182 Chip, GSATA3_6 and GSATA3_7 Con-
nectors)
Enables or disables the SATA controller integrated in the Marvell 88SE9182 chip. (Default: Enabled)
GSATA3 6_7/IDE Ctrl Mode ( Marvell 88SE9182 Chip, GSATA3_6 and GSATA3_7 Con-
nectors)
 EnablesordisablesRAIDfortheSATAcontrollerintegratedintheMarvell88SE9182chiporcongures
the SATA controller to AHCI mode.
IDE   DisablesRAIDfortheSATAcontrollerandcongurestheSATAcontrollertoIDE
mode. (Default)
RAID Enables RAID for the SATA controller.
AHCI   CongurestheSATAcontrollertoAHCImode.AdvancedHostControllerInterface
     (AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced
Serial ATA features such as Native Command Queuing and hot plug.