To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the Gigabyte G1.Sniper and is the answer not in the manual?
General| Non-ECC | Yes |
|---|---|
| Memory voltage | 1.5 V |
| Memory channels | Triple-channel |
| Number of memory slots | 6 |
| Maximum internal memory | 24 GB |
| Supported memory clock speeds | 800, 1066, 1333, 2200 MHz |
| System bus rate | 6.4 GT/s |
| Processor socket | Socket B (LGA 1366) |
| Processor manufacturer | Intel |
| Compatible processor series | Intel® Core™ i7 |
| USB 2.0 connectors | 3 |
| Number of SATA III connectors | 2 |
| Number of EATX power connectors | 1 |
| Number of Parallel ATA connectors | 0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Audio chip | Creative CA20K2 |
| Component for | PC |
| Audio output channels | 7.1 channels |
| Motherboard form factor | ATX |
| Compatible operating systems | Microsoft Windows 7/Vista/XP |
| On-board graphics card | No |
| Parallel processing technology support | 3-Way SLI |
| PCI Express slots version | 2.0 |
| Controller interface type | SATA 6Gb/s |
| Controller 2nd interface type | SATA 3Gb/s |
| RAID levels | 0, 1, 5, 10 |
| LAN controller | Bigfoot Killer E2100 |
| Ethernet interface type | Gigabit Ethernet |
| BIOS type | AWARD |
| ACPI version | 1.0b |
| BIOS memory size | 32 Mbit |
Weight and Dimensions| Depth | 264 mm |
|---|---|
| Width | 305 mm |
