System Hardware Installation - 36 -
For GPU12/GPU13/GPU13/GPU14
Follow these instructions to install the GPU card:
1. [For GPU12/GPU13/GPU13/GPU14] Loosen and remove the two screws securing the PCI cage at
the top of the system.
[For GPU4/GPU5/GPU6/GPU7] Loosen and remove the single screw at the top of the system and
the two screws at the rear of the system securing the PCI cage.
Pull the two plastic handles to lift up the PCI cage from the system.
2. Insert the card into the selected slot. Make sure that the card is properly seated.
3. Secure the GPU cards in place with two screws.
FrontRear
Top to Bottom
GPU4 (PCIE_1)
GPU5 (PCIE_2)
GPU6 (PCIE_3)
GPU7 (PCIE_4)
Top to Bottom
GPU12 (PCIE_1)
GPU13 (PCIE_2)
GPU14 (PCIE_3)
GPU15 (PCIE_4)
To Next Page
Loading...
