Gigabyte G481-HA0 - Page 72

BIOS Setup - 72 -
Parameter
Description
COM1/COM2 Serial LAN/
Legacy/Serial Port for Out-
of-Band EMS Console
Redirection Settings
(continued)

Legacy OS Redirection Resolution
(Note)
– Species the number of Rows and Columns supported for the
Legacy OS redirection.
– Options available: 80x24/80x25. Default setting is 80x24.

Putty KeyPad
(Note)
– Selects FunctionKey and KeyPad on Putty.
– Options available: T100/LINUX/XTERMR6/SCO/ESCN/VT400.
Default setting is VT100.

Redirection After BIOS POST
(Note)
– This item allows user to enable console redirection after OS has
loaded.
– Options available: Always Enable/Boot Loader. Default setting is
Always Enable.

Legacy Console Redirection Settings
– Selects a COM port to display redirection of Legacy OS and
Legacy OPROM Messages.
– Options available: COM1/COM2 Serial Over LAN. Default setting
is COM1.

Out-of-Band Mgmt Port
– Microsoft Windows Emergency Management Service (EMS) allows
for remote management of a Windows Server OS through a serial
port.
– Options available: COM1/COM2 Serial Over LAN. Default setting
is COM1.
(Note) Advanced items prompt when this item is dened.