Gigabyte G492-H80 - Front Panel LED and Buttons

- 17 - System Appearance
2-3 Front Panel LED and Buttons
1 2
3
5
4 6
No. Name Color Status Description
1.
Power button
with LED
Green On System is powered on
N/A Off System is not powered on or in ACPI S5 state (power off)
2.
ID Button Press the button to activate system identication
3.
Reset Button Press the button to reset the system.
4.
NMI button
Press the button server generates a NMI to the processor
if the multiple-bit ECC errors occur, which effectively halt
the server.
5.
HDD Status
LED
Green
On HDD locate
Blink HDD access
Amber On HDD fault
Green/
Amber
Blink HDD rebuilding
N/A Off No HDD access or no HDD fault.
6.
System
Status LED
Green Solid On System is operating normally.
Amber
Solid On
Critical condition, may indicate:
System fan failure
System temperature
Blink
Non-critical condition, may indicate:
Redundant power module failure
Temperature and voltage issue
Chassis intrusion
N/A Off
System is not ready, may indicate:
POST error
NMI error
Processor or terminator missing