Gigabyte G492-H80 - Replacing the System Fan Module

System Hardware Installation - 34 -
3-8 Replacing the System Fan Module
Follow these instructions to replace the system fan module:
1. Grasp the nger slots of the fan module and pull up to remove the fan module.
2. Reverse the previous steps to install the replacement fan module.
CAUTION!
Before you remove or install the system fans follow these steps:
• Make sure the system is not turned on or connected to AC power.
• Disconnect all necessary cable connections. Failure to observe these warnings could result in
personal injury or damage to the equipment.
1
1
2