1
English
Using GIGABYTE Notebook for the First Time
1 Connect the power cord to the AC adapter.
2 Connect the adapter to the Power (DC) Input Port on the notebook.
3 Connect the power cord to the power outlet.
Switching on the Power
After you turn on the notebook for the very
rst time, do not turn it o until the operating
system has been congured. Please note that
the volume for the audio will not function until
Windows® Setup has completed.
IMPORTANT:
•
Ensure that your Notebook PC is connected to a grounded power adapter before turning it on for the first time.
•
When using your Notebook PC on power adapter mode, the socket outlet must be near to the unit and easily
accessible.
•
Locate the input/output mark on your Notebook PC and ensure that it matches the input/output rating information
on your power adapter. Some Notebook PC models may have multiple rating output currents based on the
available SKU.
•
Power adapter information:
- Input voltage: 100-240Vac
- Input frequency: 50-60Hz
- Rating output voltag: 20V , 7.5A
* Product specications and product appearance may dier from country to country. We recommend that you check with your local
dealers for the specications and appearance of the products available in your country.
* Although we endeavor to present the most accurate and comprehensive information at the time of publication, we reserve the right to
make changes without prior notice.
1
2
3
To Next Page
Loading...
Need help?
General
