6BXC
1-1
1. INTRODUCTION
1.1. PREFACE
Welcome to use the 6BXC motherboard. It is a Pentium
II / Celeron Processor
based PC / AT compatible system with AGP / PCI / ISA Bus, and has been
designed to be the fastest PC / AT system. There are some new features allow
you to operate the system with just the performance you want.
This manual also explains how to install the motherboard for operation, and how
to set up your CMOS CONFIGURATION with BIOS SETUP program.
1.2. KEY FEATURES
q Intel Pentium
II / Celeron Processor based PC / AT compatible main board.
q Slot 1 supports Pentium
II / Celeron processor running at 233-633 MHz.
q Intel 440BX chipset, Supports AGP / SDRAM / Ultra DMA/33 IDE / Keyboard
and PS/2 Mouse Power On / ACPI features.
q Supports 3xDIMMs using 3.3V SDRAM DIMM module.
q Supports 8 MB – 768 MB SDRAM memory on board.
q Supports ECC or Non-ECC type DRAM module.
q 1xAGP slot, 4xPCI Bus slots, 3xISA Bus slots.
q Supports 2 channels Ultra DMA/33 IDE ports for 4 IDE Devices.
q Supports 2xCOM (16550), 1xLPT (EPP / ECP), 1x1.44MB Floppy port.
q Supports 2xUSB ports, 1xPS/2 Mouse & 1xPS/2 Keyboard.
q Licensed AWARD BIOS, 2M bits FLASH ROM.
q 30.5 cm x 18 cm ATX SIZE form factor, 4 layers PCB.
To Next Page
Loading...
