6VX7-4X Motherboard
41
A.5 Notices:
1. In order for STR to function properly, several hardware and software requirements must be
satisfied:
A. Your ATX power supply must comply with the ATX 2.01 specification (provide more than
720 mA 5V Stand-By current).
B. Your SDRAM must be PC-100 compliant.
2. Jumper JP5 is provided to connect to the STR LED in your system chassis. [Your chassis
may
not provide this feature.] The STR LED will be illuminated when your system is in STR sleep
mode.
STR LED Connector External
To Next Page
Loading...
