6VXE7+
4-14
•
Read Around write
The default value is Enabled.
Enabled
When set Enabled this feature speeds up data read
performance.
Disabled Normal operation.
•
Concurrent PCI/Host
The default value is Disabled.
Enabled
Enabled Concurrent PCI/Host.
Disabled Disabled Concurrent PCI/Host.
•
AGP Aperture Size
The default value is 64MB
64MB Set AGP Aperture Size to 64MB.
32MB Set AGP Aperture Size to 32MB.
16MB Set AGP Aperture Size to 16MB.
8MB Set AGP Aperture Size to 8MB.
4MB Set AGP Aperture Size to 4MB.
128MB Set AGP Aperture Size to 128MB.
•
Power LED in Suspend
The default value is BLINKING
BLINKING Set Power LED in Suspend at BLINKING mode.
ON Set Power LED in Suspend at ON mode.
OFF/DUAL Set Power LED in Suspend at OFF/DUAL mode, if you
use a dual color power LED , it will show dual color.
•
Spread Spectrum
The default value is Disabled.
Disabled Spread Spectrum Disabled
Enabled Set Spread Spectrum Enabled.
To Next Page
Loading...
