6VXE7+
4-18
•
RTC Alarm Resume
You can set “RTC Alarm Resume” item to Enabled and key in date/time to
power on system. The default value is Disabled.
Disabled Disable this function.
Enabled Enable alarm function to POWER ON system.
If the “RTC Alarm Resume” is Enabled.
Date ( of Month) Alarm : 0~31
Time ( hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59)
•
Primary INTR
The default value is ON.
ON Primary INTR function is on.
OFF Normal Operation.
•
IRQ [3~15]
The default value is Primary/Secondary/Disabled.
Disabled Disable this function.
Primary The resource is used by Primary device .
Secondary The resource is used by Secondary device .