BIOS Configration
4-25
•
UART2 Mode
(This item allows you to determine which UART2 Mode of onboard I/O
chip), the default value is Standard.
ASKIR Set onboard I/O chip UART2 to ASKIR Mode.
IrDA 1.0 Set onboard I/O chip UART2 to IrDA Mode.
Standard Set onboard I/O chip UART2 to Standard Mode.
•
UART2 Duplex Mode
The default value is Half.
Half Set UART2 Duplex Mode to Half.
Full Set UART2 Duplex Mode to Full.
•
PS/2 Mouse Power on
The default value is Disabled.
Disabled Disable PS/2 Mouse Power on .
Db Click Double click PS/2 Mouse bottom.
•
Keyboard Power on
The default value is POWER Key.
POWER Key
If your keyboard have “POWER Key” button, you can
press the key to power on your system.
Multi key Enter multikey combination to Power on system.
•
KB Power On Password
Enter
Enter from 1 to 5 characters to set the Keyboard Power On
Password.
To Next Page
Loading...
