EasyManua.ls Logo

Gigabyte GA-7N400 Pro2 - Step 5: Connect ribbon cables, cabinet wires and power supply

Gigabyte GA-7N400 Pro2
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Hardware Installation Process
English
- 21 -
Step 5: Connect ribbon cables, cabinet wires and power supply
Step 5-1: I/O Back Panel Introduction
1 For GA-7N400 Pro2 only. 3 For GA-7N400-L only.
GA-7N400 Pro2 / GA-7N400-L
GA-7N400
PS/2 Keyboard and PS/2 Mouse Connector
This connector supports standard PS/2
keyboard and PS/2 mouse.
PS/2 Mouse Connector
(6 pin Female)
PS/2 Keyboard Connector
(6 pin Female)
/ USB/LAN Connector
Before you connect your device(s) into USB
connector(s), please make sure your device(s)
such as USB keyboard,mouse, scanner, zip,
speaker...etc. Have a standard USB interface.
Also make sure your OS supports USB
controller. If your OS does not support USB
controller, please contact OS vendor for
possible patch or driver upgrade. For more
information please contact your OS or device
(s) vendors.
USB 0
USB 1
USB 2
USB 3
LAN
(
1313
1313
13 )
¥¼©R¦W-1 2005/5/5, ¤W¤È 11:3621

Table of Contents

Related product manuals