Hardware Installation Process
English
- 37 -
1
1
27) CLR_CMOS
You may clear the CMOS data to its default values by this jumper.
Default doesn't include the “Shunter” to prevent from improper use this jumper. To clear CMOS,
temporarily short 1-2 pin.
Open: Normal
1-2 close: Clear CMOS
26) CI (CASE OPEN)
This 2-pin connector allows your system to enable or disable the "Case Open" item in BIOS, if the
system case begin remove.
Pin No. Definition
1 Signal
2 GND
1
¥¼©R¦W-1 2005/5/5, ¤W¤È 11:5237
To Next Page
Loading...
