Appendix- 79 -
English
Line Out
2 Channel Audio Setup:
We recommend that you use speakers with amplifier to acquire the best sound effect if the stereo output is
applied.
STEP 1:
Connect the stereo speakers or earphone to "Line
Out".
STEP 2:
After installation of the audio driver, you'll find an
icon in the system area. Double click the icon to
select the function.
STEP 3:
Click "C-Media 3D Audio Configuration" and then
select "Main Setting". The current audio mode is
displayed in "Audio System Status". "Smart Jack"
would auto-detect the speaker type you connect
and gives you the functions to manually modify
the speaker settings.
The function to
manually modify
speaker settings.
The function to
adjust speaker
volume.
To Next Page
Loading...
