- 35 - BIOS Setup
English
Advanced BIOS Features
C First / Second / Third Boot Device
8Floppy Select your boot device priority by Floppy.
8LS120 Select your boot device priority by LS120.
Figure 3: Advanced BIOS Features
" # " System will detect automatically and show up when you install the Intel
®
Pentium
®
4 processor
with HT Technology.
CMOS Setup Utility-Copyright (C) 1984-2003 Award Software
Advanced BIOS Features
First Boot Device [Floppy] Item Help
Second Boot Device [HDD-0] Menu Level u
Third Boot Device [CDROM] Select Boot Device
Boot Up Floppy Seek [Disabled] priority
Password Check [Setup]
# CPU Hyper-Threading [Disabled] [Floppy]
Flexible AGP 8X [Auto] Boot from floppy
Init Display First [AGP]
[LS120]
Boot from LS120
[HDD-0]
Boot from First HDD
[HDD-1]
Boot from second HDD
higf: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Please be noticed the follow ing circumstance when Intel
®
Pentium
®
4 Processor with Hyper-Threading
Technology is applied and enabled.
1. Do not support EasyTune
™
4, @BIOS
™
, Q-Flash
™
, DMI information viewer, and Facewizard
™
(which are value-added software developed by Gigabyte)
2. Do not support S3 (Suspended to RAM)
3. Wake-up from S1 by power button only. Can't wake-up from S1 by keyboard or mouse.
4. Press the power button for 4 seconds to turn off the computer if under DOS mode or legacy mode
(before ACPI or APM mode is initiated).
5. Do not provide detail setting for "Power Management Setup" and setting for "USB legacy support" (in
"Integrated peripherals" section) during BIOS setup.
To Next Page
Loading...
