- 17 - Hardware Installation Process
English
If you want the detail information for 2-/4-/6-channel audio setup
installation, please refer to page 76.
y USB/LAN Connector
Before you connect your device(s) into U SB
connector(s), please make sure your device(s)
such as USB keyboard,mouse, scanner, zip,
speaker...etc. Have a standard USB interface.
Also make sure y our OS supports USB
controller. If your OS does not support USB
controller, please contact OS vendor for
possible patch or driver upgrade. For more
information please contact your OS or device(s)
vendors.
w Game / MIDI Ports
x Audio Connectors
This connector supports joystick, MIDI
keyboard and other relate audio devices.
After install onboard audio driver, you may con-
nect speaker to Line Out jack, microphone to
MIC In jack. Device like CD-ROM,walkman
etc. can be connected to Line-In jack.
Please note:
You are able to use 2-/4-/6-channel audio feature
by S/W selection.
If you want to enable 6-channel function, you
have 2 choose for hardware connection.
Method1:
Connect "Front Speaker" to "Line Out"
Connect "Rear Speaker" to "Line In"
Connect "Center and Subwoofer" to "MIC Out ".
Method2:
You can refer to page 26, and contact your
nearest dealer for optional SUR_CEN cable.
MIC In
(Center and
Subwoofer)
Line Out
(Front Speaker)
Line In
(Rear Speaker)
Joystick/ MIDI (15 pin Female)
USB 0
USB 1
LAN
8s661fxm_1001_q.p65 ?2003/9/24, 上午 09:3317
To Next Page
Loading...
