- 51 - BIOS Setup
English
Top Performance
Top Performance
If you wish to maximize the performance of your system, set "Top Performance" as "Enabled".
Disabled Disable this function. (Default Value)
Enabled Enable Top Performance function.
"Top Performance" w ill increase H/W working speed. Different system configuration (both H/W
component and OS) will effect the result. For ex ample, the same H/W configuration might not run
properly with Windows XP, but works smoothly with Windows NT. Therefore, if your system is not
perform enough, the reliability or stability problem will appear sometimes, and we will recommend
you disabling the option to avoid the problem as mentioned above.
Figure 9: Top Performance
CMOS Setup Utility-Copyright (C) 1984-2003 Award Software
}Standard CMOS Features Top Performance
}Advanced Chipset Features Load Fail-Safe Defaults
}Integrated Peripherals Load Optimized Defaults
}Power Management Setup Set Supervisor Password
}PnP/PCI Configurations Set User Password
}PC Health Status Save & Exit Setup
}Frequency/Voltage Control Exit Without Saving
ESC:Quit higf:Select Item
F8: Q-Flash F10:Save & Exit Setup
Top Performance
Disabled...................[ n]
Enabled...................[ ]
hi: Move ENTER: Accept
ESC: Abort
8s661fxm_1001_b.p65 ?2003/9/24, 上午 09:5051
To Next Page
Loading...
