- 23 - Hardware Installation Process
English
+
_
8) PWR_LED
PWR_LED is connect with the sy stem power indicator to indicate whether the system is on/off.
It will blink when the system enters suspend mode. If you use dual color LED, power LED will turn
to another color.
Pin No. Definition
1 MPD+
2 MPD-
3 MPD-
1
9) RAM_LED
Do not remove memory modules while RAM_LED is on. It might cause short or other unexpected
damages due to the stand by voltage. Remove memory modules only w hen AC power cord is
disconnected.
8s661fxm_1001_q.p65 ?2003/9/24, 上午 09:3323
To Next Page
Loading...
