- 27 - Hardware Installation Process
English
16) CI (CASE OPEN)
This 2-pin connector allows your system to enable or disable the "Case Open" item in BIOS, if the
system case begin remove.
Pin No. Definition
1 Signal
2 GND
1
17) CLR_CMOS (Clear CMOS)
You may clear the CMOS data to its default values by this jumper.
To clear CMOS, temporarily short 1-2 pin.
Open: Normal
Close: CLEAR CMOS
# Default doesn't include the "Shunter" to prevent from improper use this jumper.
8s661fxm_1001_q.p65 ?2003/9/24, 上午 09:3327
To Next Page
Loading...
