BIOS Setup- 41 -
English
CPU Clock (MHz)
This option is available only when Linear Frequency Control is enabled.
100~355 Select CPU Clock to 100MHz~355MHz.
If you use a Pentium 4 processor with 400MHz FSB, please set "CPU Clock" to 100MHz. If you
use a Pentium 4 processor with 533MHz FSB, please set "CPU Clock" to 133MHz.
Incorrect using it may cause your system corrupted. For power users only!
DRAM Clock (MHz)
This option is available only when Linear Frequency Control is enabled.
Please set DRAM Clock according to your requirement.
If you use DDR266 DRAM module, please set "DRAM Clock(MHz)" to 266. If you use DDR333
DRAM module, please set "DRAM Clock(MHz)" to 333.
Incorrect using it may cause your system corrupted. For power users only!
AGP/PCI Clock Control
AUTO Set AGP/PCI clock automatically. (Default Value)
Manual Set AGP/PCI clock manually.
Incorrect using it may cause your system corrupted. For power users only!
AGP Clock (MHz)
This option is available only when AGP/PCI Clock Control is set to Manual.
Please set AGP Clock according to your requirement.
Incorrect using it may cause your system corrupted. For power users only!
PCI Clock (MHz)
When you select to set the AGP Clock (MHz) manually, the PCI Clock (MHz) will change
automatically depending on the AGP Clock (MHz) you set.
To Next Page
Loading...
Need help?
General
