GA-8S661GXMP(-C) Motherboard - 60 -
English
4-1-3 2 / 4 / 6 Channel Audio Function Introduction
Please follow the steps below to enable the function!
STEP 1:
Connect the stereo speakers or earphone to "Line
Out."
STEP 3:
On the AC97 Audio Configuration menu, click the
Speaker Configuration tab and select the
2-channel mode for stereo speaker output
check box.
2 Channel Audio Setup
We recommend that you use speakers with amplifier to get the best sound effect if the stereo output is
applied.
Line Out
STEP 2:
After installing the audio driver, you’ll find a Sound
Effect icon on the lower right hand taskbar.
Click the icon to select the function.
To Next Page
Loading...
Need help?
General
