Gigabyte GA-965QM-DS2 - The Main Menu (for Example: BIOS Ver.: D11)

GA-965QM-DS2 (rev. 2.0) Motherboard - 30 -
English
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
 Standard CMOS Features
 Advanced BIOS Features
 Integrated Peripherals
 Power Management Setup
 PnP/PCI Configurations
 PC Health Status
 Frequency/Voltage Control
 Security Chip Configuration
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving

Time, Date, Hard Disk Type...
1. If you don't find the settings you want, press "Ctrl+F1" to access advanced options.
2. Select the Load Optimized Defaults item in the BIOS Setup when somehow the system
is not stable as usual. This action makes the system reset to the default settings for stability.
3. The BIOS Setup menus described in this chapter are for reference only and may differ from
the exact settings for your motherboard.
The Main Menu (For example: BIOS Ver. : D11)
Once you enter Award BIOS CMOS Setup Utility, the Main Menu (as figure below) will appear on the
screen. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.
<F12> : Boot Menu
Select boot sequence for onboard (or add-on cards) device.
Press <F12> to enter the Boot Menu and use < > or < > to select a device, then press enter to accept.
Press <ESC> to exit this menu.
Boot Menu
== Select a Boot First device ==
:Move Enter:Accept ESC:Exit
Floppy
LS120
Hard Disk
CDROM
ZIP
USB-FDD
USB-ZIP
USB-CDROM
USB-HDD
Legacy LAN
Press F12
Award Modular BIOS v6.00PG, An Energy Star Ally
Copyright (C) 1984-2006, Award Software, Inc.
Intel Q965 BIOS for 965QM-DS2 D11
.
.
.
.
<DEL>: BIOS Setup/Q-Flash <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qflash
12/19/2006-Q965-ICH8-6A79LG0OC-00
BIOS Setting Recovery
 F11 : Save CMOS to BIOS
This function allows you to make a record of the current CMOS settings as a profile.
You can create up to 8 profiles (Profile 1-8) and give each of them a name.
 F12 : Load CMOS from BIOS
If your system becomes unstable and you load the default BIOS settings, you can use this function
to reload the CMOS settings with a CMOS settings profile created before, without the hassles of
resetting the CMOS configurations.