Gigabyte GA-965QM-DS2 - Page 62

GA-965QM-DS2 (rev. 2.0) Motherboard - 62 -
English
Step 3:
Save and exit BIOS Setup.
Figure 2
Step 2:
Set First Boot Device under the Advanced BIOS Features menu to CDROM to boot from CD-ROM
after system restarts (Figure 2).
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
Advanced BIOS Features
 Hard Disk Boot Priority [Press Enter]
First Boot Device [CDROM]
Second Boot Device [Hard Disk]
Third Boot Device [CDROM]
Password Check [Setup]
HDD S.M.A.R.T. Capability [Disabled]
CPU Hyper-Threading [Enabled]
Limit CPUID Max. to 3 [Disabled]
No-Execute Memory Protect [Enabled]
CPU Enhanced Halt (C1E) [Enabled]
CPU Thermal Monitor 2(TM2) [Enabled]
CPU EIST Function [Enabled]
Virtualization Technology [Enabled]
Console Redirection Disabled
x Baud Rate 19200
Agent after boot Enabled
ASF support [Enabled]
Init Display First [PCI]
Onboard VGA [Enable If No Ext PEG]
On-Chip Frame Buffer Size [8MB]
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level