Gigabyte GA-970-Gaming - Peripherals Configuration

 Tocancelthepassword,press<Enter>onthepassworditemandwhenrequestedforthepassword,enter
thecorrectonerst.Whenpromptedforanewpassword,press<Enter>withoutenteringanypassword.
Press<Enter>againwhenpromptedtoconrm.
 NOTE:BeforesettingtheUserPassword,besuretosettheAdministratorPasswordrst.
2-5 Peripherals
& Audio LED
 EnablesordisablestheonboardaudioLEDfunction.
Off   Disablesthisfunction.
StillMode  TheLEDsstayconstantlyon.(Default)
BeatMode ThebrightnessoftheLEDchangesaccordingtothemusicrhythm.
PulseMode ThebrightnessoftheLEDchangesslowlyandsmoothlylikebreath.
& OnChip SATA Controller
 EnablesordisablestheintegratedSATAcontrollers.(Default:Enabled)
& OnChip SATA Type
 EnablesordisablesRAIDfortheSATAcontrollersintegratedintheChipsetorcongurestheSATAcontrollers
to AHCI mode.
NativeIDE  CongurestheSATAcontrollertoIDEmode.
RAID   EnablesRAIDfortheSATAcontroller.
AHCI   CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface
(AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced
SerialATAfeaturessuchasNativeCommandQueuingandhotplug.(Default)
& OnChip SATA Port4/5 Type (SATA3 4/SATA3 5 connectors)
 ThisoptioniscongurableonlywhenOnChip SATA Type is set to RAID or AHCI.Congurestheoperating
mode of the integrated SATA3 4~SATA3 5 connectors.
As SATA Type The mode depends on the OnChip SATA Type settings.
IDE   CongurestheSATA34~SATA35connectorstoPATAmode.(Default)
- 28 -