Password Set a password with 1~5 characters to turn on the system.
Any key Press any key to turn on the system.
& Power On Password
Set the password when Power On By Keyboard is set to Password.
again without entering the password to clear the password settings.
& Power On By Mouse
Allows the system to be turned on by a PS/2 mouse wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
Move Move the mouse to turn on the system.
& ErP
Note: When this item is set to Enabled
PME event wake up, power on by mouse, power on by keyboard, and wake on LAN.
2-7 Save & Exit
& Save & Exit Setup
Yes. This saves the changes to the CMOS and exits the BIOS Setup
program. Select No
& Exit Without Saving
Yes. This exits the BIOS Setup without saving the changes made
in BIOS Setup to the CMOS. Select No
- 31 -
To Next Page
Loading...
