Gigabyte GA-990FXA-UD3 - Page 45

- 45 - BIOS Setup
HDD S.M.A.R.T. Capability
Enables or disables the S.M.A.R.T. (Self Monitoring and Reporting Technology) capability of your hard
drive. This feature allows your system to report read/write errors of the hard drive and to issue warnings
when a third party hardware monitor utility is installed. (Default: Disabled)
Away Mode
Enables or disables Away Mode in Windows XP Media Center operating system. Away Mode allows the
system to silently perform unattended tasks while in a low-power mode that appears off.
(Default: Disabled)
Full Screen LOGO Show
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled displays
normal POST message. (Default: Enabled)
IOMMU support
Enables or disables AMD IOMMU support. (Default: Disabled)
Init Display First
Species the rst initiation of the monitor display from the installed PCI graphics card or PCI Express
graphics card.
PCI Slot Sets the PCI graphics card as the rst display. (Default)
PEG Sets the PCI Express graphics card on the PCIEX16_1 slot as the rst display.
PEG1 Sets the PCI Express graphics card on the PCIEX16_2 slot as the rst display.
PEG2 Sets the PCI Express graphics card on the PCIEX4_1 slot as the rst display.
PEG3 Sets the PCI Express graphics card on the PCIEX4_2 slot as the rst display.