Gigabyte GA-990FXA-UD5 - Page 87

- 87 -
Appendix
Step 3:
On the next screen, press <Enter> to continue the driver installation. After the driver installation, you can pro-
ceed with the Windows XP installation.
For the Marvell 88SE9172:
InserttheoppydiskcontainingtheSATARAID/AHCIdriverandpress<Enter>.BothoftheMarvell shared
library and Marvell 91xx SATA Controller need to be installed. Below we assume that you are installing
the 32-bit version. First select Marvellsharedlibrary(installrst) and press <Enter>. On the next screen,
press <S> to return to the screen in Figure 5. Then select Marvell 91xx SATA Controller 32bit Driver and
press<Enter>.Whenbothofthetwodriversappearontheconrmationscreen,press<Enter>tocontinue
the driver installation.
Figure 5
Windows Setup
You have chosen to congure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
ENTER=Select F3=Exit
Marvell shared library (install rst)
Marvell 91xx SATA Controller 32bit Driver