Gigabyte GA-990FXA-UD5 - Configuring S;Pdif Out

- 93 -
Appendix
(Note) EntertheDigital Output(Optical)screentocongurefurthersettingsifyouusetheS/PDIFOut
  connector(s)onthebackpanelfordigitalaudiooutputorentertheDigital Output screen if you
  usetheinternalS/PDIFOutconnector(SPDIF_O)fordigitalaudiooutput.
2.ConguringS/PDIFOut:
On the Digital Output(Optical) screen
(Note)
, click the Default Format tab and then select the sample rate and
bit depth. Click OK to complete.
5-2-2 ConguringS/PDIFOut
The S/PDIF Out jacks can transmit audio signals to an external decoder for decoding to get the best audio
quality.
1. Connecting a S/PDIF Out Cable:
Connect a S/PDIF optical cable to the corresponding S/PDIF out connector as shown below and an external
decoder for transmitting the S/PDIF digital audio signals.
Connects to a S/PDIF optical cable