Gigabyte GA-990FXA-UD7 - Page 32

Hardware Installation
- 32 -
18/19/20) PW_SW/ RST_SW/ CMOS_SW (Quick Buttons)
This motherboard has 3 quick buttons: power button, reset button and clear CMOS button. The power button
and reset button allow users to quickly turn on/off or reset the computer in an open-case environment when
they want to change hardware components or conduct hardware testing. Use the clear CMOS button to
cleartheBIOScongurationandresettheCMOSvaluestofactorydefaultswhenneeded.
• Always turn off your computer and unplug the power cord from the power outlet before clearing
the CMOS values.
• Do not use the clear CMOS button when the system is on, or the system may shutdown and
data loss or damage may occur.
• Aftersystemrestart,gotoBIOSSetuptoloadfactorydefaults(selectLoadOptimizedDefaults)or
manuallyconguretheBIOSsettings(refertoChapter2,"BIOSSetup,"forBIOScongurations).
PW_SW: Power button
RST_SW: Reset button
CMOS_SW: Clear CMOS Button
CMOS_SW
PW_SW
RST_SW