Need help?Do you have a question about the Gigabyte GA-970A-D3P and is the answer not in the manual?
General| Memory voltage | 1.5 V |
|---|---|
| Internal memory | 32 GB |
| Memory slots type | DIMM |
| Supported memory types | DDR3-SDRAM |
| Supported memory clock speeds | 1066, 1333, 1600, 1866, 2000 MHz |
| Processor socket | Socket AM3+ |
| Processor manufacturer | AMD |
| Compatible processor series | AMD Phenom II Dual-Core Mobile, AMD Phenom II Quad-Core Mobile, AMD Phenom II Triple-Core Mobile, AMD Phenom II X2, AMD Phenom II X3, AMD Phenom II X4, AMD Phenom II X6, AMD Phenom II X8 |
| USB 2.0 connectors | 3 |
| S/PDIF out connector | Yes |
| Number of SATA II connectors | 0 |
| Number of SATA III connectors | 6 |
| Number of Parallel ATA connectors | - |
| USB 3.2 Gen 1 (3.1 Gen 1) connectors | 1 |
| USB 2.0 ports quantity | 8 |
| Audio chip | VIA VT2021 |
| Component for | PC |
| Motherboard chipset | AMD 970 |
| Audio output channels | 7.1 channels |
| Motherboard form factor | ATX |
| Motherboard southbridge | AMD SB950 |
| RAID levels | 0, 1, 5, 6, JBOD |
| Supported storage drive interfaces | SATA III |
| BIOS type | EFI AMI |
| BIOS memory size | 64 Mbit |
Weight and Dimensions| Depth | 224 mm |
|---|---|
| Width | 605 mm |
Step-by-step instructions for installing the CPU and its cooler.
Guide on how to properly install RAM modules for optimal performance.
Procedure for installing expansion cards like graphics or sound cards.
Description and identification of all external connectors on the motherboard's rear panel.
Identification and function of internal headers and connectors on the motherboard.
Steps to set SATA controller mode (IDE, AHCI, RAID) in BIOS.
Guide for installing OS with necessary SATA RAID/AHCI drivers.
Procedure for installing essential chipset drivers from the motherboard disk.
Common troubleshooting steps and FAQs for system startup issues.
To Next Page