Gigabyte GA-970A-D3P - Configuring S;Pdif Out

- 73 -
Appendix
6-1-2 ConguringS/PDIFOut
The S/PDIF Out jack can transmit audio signals to an external decoder for decoding to get the best audio quality.
1. Connecting a S/PDIF Out Cable:
Connect a S/PDIF optical cable to the corresponding S/PDIF out connector as shown below and an external
decoder for transmitting the S/PDIF digital audio signals.
Connects to a S/PDIF optical cable
2.ConguringS/PDIFOut:
On the SPDIF Out screen
(Note)
, click the Default Format tab and then select the sample rate and bit depth.
Click OK to complete.
(Note) EntertheSPDIF OutscreentocongurefurthersettingsifyouusetheS/PDIFOutconnector(s)on
the back panel for digital audio output or enter the SPDIF HDMI screen if you use the internal S/PDIF
Outconnector(SPDIF_O)fordigitalaudiooutput.